Mold Survey
A Mold Survey is primarily a visual non-intrusive examination of a building to identify areas of moisture that may lead to mold or fungal growth. The survey report will contain recommendations regarding conditions reported and may contain recommendations for further evaluation by approprate industry professionals.
Also included in the report are suggestions for preventative measures that could potentially reduce the possibility of moisture issues and future mold conditions. We can help you put together a plan to handle the issues observed, as we have taken mold courses and attended seminars on mold as part of our continuing education commitments. Through these courses we have learned a great deal about mold...what it is, what causes it, and how to remove it.
The Mold Survey Process...
Interviews with the people who occupy the home are a key starting point. We develop a history of the building to include building issues and repairs, water leaks, and health problems. The water infiltration and repair history of a building helps us to determine which initial areas may warrant closer inspection.
Visual Survey of the building is conducted next. We inspect the exterior and interior of the home to determine if you have current or previous moisture infiltration issues. We can also determine if you have moisture or condensation conditions within the home that are not caused by exterior moisture infiltration. We determine if the condition of the home and the care it has been given (or lack thereof) are contributing to mold growth or the potential for future mold growth. We inspect the home for visible mold growth.
Comprehensive Moisture Survey of the home is also conducted using specialized equipment. Baseline moisture readings are collected from building materials in areas without a history of water damage. Moisture readings are then taken at potential problem areas and compared to the baseline moisture readings. Moisture content readings are an integral part of the process and are used in development of a repair plan and if needed, a remediation protocol.
Mold sampling is not part of a mold survey. Only an inspection is done with recommendations for sampling to be completed, if needed, by the appropriate professionals.
Why We Do Not Test Or Sample For Mold
Simply because...if you smell mold or see mold...it's there and you've got it!
According to the Environmental Protection Association, "In most cases, if visible mold growth is present, sampling is unnecessary." Money spent on sampling in these situations is better spent on cleanup and repair.
The EPA also states "sampling for mold should be conducted by professionals who have specific experience in designing mold sampling protocols, sampling methods and interpreting results".
The American Industrial Hygenists Association also recommends against testing for mold and recommends that "looking for evidence for water damage and visible mold growth should be your first step. Testing for mold is expensive, and you should have a clear reason for doing so. In addition, there are no standards for acceptable levels of mold in the indoor environment. When testing is done, it is usually to compare the levels and types of mold spores found inside the home with those found outdoors. If you know you have a mold problem, it is more important to spend time and resources getting rid of the mold and solving the moisture problems causing the moldy conditions".
What Does Mold Need to Grow?
Mold needs water to grow. Mold also needs food, oxygen and a temperature between 40 degrees and 100 degrees F.
In buildings, as far as food sources for mold, this can include wood, insulation, OSB, drywall, carpeting, clothing, paper and even dirt. Mold can even digest some synthetic materials such as adhesives and paints.
Where Does the Water/Moisture Come From?
There are many possible sources of moisture affecting buildings. Not all moisture problems are caused by water entering from the outside. There are also many things on the inside that can contribute to moisture problems. The following are just some possible sources of moisture.
Problems with exterior grading
Landscaping and drainage issues
Flooding and water seepage
Roof leaks
Missing downpsouts and extensions
Improperly installed synthetic stucco (EIFS)
Improperly installed siding materials
Improper or missing flashings
Improperly installed roofing materials
Plumbing leaks
Overflow from tubs, sinks or toilets
Firewood stored indoors
Improper venting of kitchen and bathroom areas
Improper venting of combustion appliances
Venting clothes dryers to the interior
Line drying clothes indoors
House plants
Showering and bathing
Washing floors
Humidifiers
Damp basement or crawlspace
Air leaks in your home
|
|
We look foward to being of service.
| |
|
